Ensure the surface is clean and free from dust and dirt. We recommend using on new items.
Spray evenly over the entire surface from a distance of approx. 10-15 cm until the surface is damp.
We recommend the coating is gently rubbed into the fibres to ensure it bonds deep into the fabric using a clean, soft brush.
Allow 10 minutes then repeat steps 2 & 3 at least once. Leave to air dry for 24 hours.
Please note – the application method is very important. Not following the instructions correctly may cause irregular protection or visible patches. We are always here to help, so please contact us. DO NOT USE ON WATERPROOF, RESISTANT OR REPELLENT MATERIALS.
Do not apply Liquiproof on top of other delicate, porous surfaces, such as; granite or marble worktops. They will become water repellent!
When carrying out Step 3, start on the lightest colours first or use a separate brush for each colour material. Not following this process may cause irreversible colour bleed.
Try not to oversaturate the material. If over-spraying occurs, absorb with a clean, dry cloth.
We cannot guarantee that our coating will work to its best ability if the surface has already been previously treated with other products, so we recommend applying Liquiproof to new items. Using cleaning or treatment products such as polish on top of our coating will reduce effectiveness.
Liquiproof will not fill air gaps and therefore liquids will still pass through any mesh/netting.
If any residue or soiling agents fail to bead up and roll off, simply wash off with clean water immediately. If it still remains, rub with a clean absorbent cloth. Follow care guidelines of the garment.